Duratuf Products Pvt. Ltd. is a Kolkata, India based industrial safety solutions company supplying IEC 61111:2009 certified electrical insulating mats to Taiwan’s industrial sectors. Taiwan operates one of the most electrically intensive industrial economies in Asia. Semiconductor fabrication plants in Hsinchu, petrochemical complexes in Kaohsiung, steel mills in Taichung, and electronics manufacturing clusters across Tainan and Taipei run continuous high-voltage operations where electrical safety compliance is mandatory for the companies.
Taiwan’s safety regulations follow IEC and CNS standards, with the Bureau of Standards, Metrology and Inspection (BSMI) governing conformity assessment for industrial safety equipment. Our IEC 61111:2009 mats is manufactured and tested to IEC 61111:2009 with the international benchmark Taiwan’s procurement teams and EHS auditors reference. We supply the full voltage class range from Class 0 (1 kV) to Class 4 (36 kV), with bulk supply capability, complete type test documentation, and technical datasheets for every order.
Explore Our Electrical Insulating Mats for Taiwan’s Industrial Sectors
All our mats are voltage class tested from Class 0 (1 kV) through Class 4 (36 kV), with full type test documentation available for audit and procurement submission. With 16+ years in industrial safety and 65+ countries served, we supply Taiwan’s high-tech manufacturing and utility sectors with electrical safety mats that meet the compliance standard your industry require.
IEC 61111:2009 Electrical Insulating Mats
Electrical Rubber mats for IEC 61111 standards are used for high voltages protection and are widely used in switchboard rooms, transformer bays, IT panel rooms, generator yards and high-voltage control panels
Key Features:
- Classes 0 to 4
- Rated for voltages up to 36kV
- Thickness range: 2mm-5mm
- Mechanical puncture resistance minimum 70 N
- Flame retardant and tested at low temperature down to -25°C
- Resistant to oils, acids, and surface ageing
- Anti-skid top and bottom textured surface for stable footing
- High dielectric strength: 10 kV to 50 kV across voltage classes.
Our electrical insulating mats are ideal for semiconductor fabrication sectors, petrochemical plant electrical rooms, steel mill motor control centres, data centre power infrastructure, Taiwan Power Company substation installations and more.
ASTM D178 Electrical Insulating Mats
ASTM D178 is an electrical rubber mat manufactured and type tested as per American multinational standards. ASTM D178 mat covers semiconductor fabs, electronics plants and industrial sectors where the parent company or project owner specifies ASTM rather than IEC as the compliance baseline.
Key Features:
- Class 0 to Class 4, working voltages from 1 kV to 36 kV
- Thickness range: 3.2 mm to 12.7 mm depending on class
- Type I (standard) and Type II variants available
- Type II options: ozone resistant, flame resistant, oil resistant
- Tensile strength minimum 4.83 MPa
- Anti-skid top fine ribbed and bottom textured surface
- Available in custom widths up to 1,220 mm and lengths up to 30 m
These mats are the right choice for American semiconductor companies, US EPC-contracted industrial projects, and Taiwanese companies whose internal EHS standards reference ASTM D178 as the procurement specification.
Explore Our Electrical Insulating Mats for Taiwan’s Industrial Sectors
All our mats are voltage class tested from Class 0 (1 kV) through Class 4 (36 kV), with full type test documentation available for audit and procurement submission. With 16+ years in industrial safety and 65+ countries served, we supply Taiwan’s high-tech manufacturing and utility sectors with electrical safety mats that meet the compliance standard your industry require.
IEC 61111:2009 Electrical Insulating Mats
Electrical Rubber mats for IEC 61111 standards are used for high voltages protection and are widely used in switchboard rooms, transformer bays, IT panel rooms, generator yards and high-voltage control panels
Key Features:
- Classes 0 to 4
- Rated for voltages up to 36kV
- Thickness range: 2mm-5mm
- Mechanical puncture resistance minimum 70 N
- Flame retardant and tested at low temperature down to -25°C
- Resistant to oils, acids, and surface ageing
- Anti-skid top and bottom textured surface for stable footing
- High dielectric strength: 10 kV to 50 kV across voltage classes.
Our electrical insulating mats are ideal for semiconductor fabrication sectors, petrochemical plant electrical rooms, steel mill motor control centres, data centre power infrastructure, Taiwan Power Company substation installations and more.
ASTM D178 Electrical Insulating Mats
ASTM D178 is an electrical rubber mat manufactured and type tested as per American multinational standards. ASTM D178 mat covers semiconductor fabs, electronics plants and industrial sectors where the parent company or project owner specifies ASTM rather than IEC as the compliance baseline.
Key Features:
- Class 0 to Class 4, working voltages from 1 kV to 36 kV
- Thickness range: 3.2 mm to 12.7 mm depending on class
- Type I (standard) and Type II variants available
- Type II options: ozone resistant, flame resistant, oil resistant
- Tensile strength minimum 4.83 MPa
- Anti-skid top fine ribbed and bottom textured surface
- Available in custom widths up to 1,220 mm and lengths up to 30 m
These mats are the right choice for American semiconductor companies, US EPC-contracted industrial projects, and Taiwanese companies whose internal EHS standards reference ASTM D178 as the procurement specification.
Compliance & International Certifications
All our insulating rubber mats are tested according to globally recognised standards
Voltage Comparison for Insulating Mats: Technical Specification
Choosing the right insulating mat depends on your maximum system voltage and working conditions.
| Standard | Class Range | Maximum Use Voltage | AC Proof Voltage | Dielectric Strength | Thickness | Color |
|---|---|---|---|---|---|---|
| IEC 61111:2009 | Class 0 to Class 4 | 1.0 kV to 36.0 kV | 5.0 kV to 40.0 kV | 10.0 kV to 50.0 kV | 2.0 mm to 5.0 mm | Black |
| ASTM D178 | Class 0 to Class 4 | 1.0 kV to 36.0 kV | 5.0 kV to 40.0 kV | 10.0 kV to 50.0 kV | 3.2 mm to 12.7 mm | Black |
Applications of Insulating Rubber Mats in Taiwan
Taiwan’s power and manufacturing sectors run some of the highest electrical load densities in Asia. Our insulating mats are used across these environments:
Semiconductor Fabrication Facilities
Hsinchu and Southern Taiwan Science Park fabs run 24×7 high-voltage operations. IEC 61111 mats are placed at HV distribution panels, UPS rooms, and motor control centres wherever operators access live equipment.Petrochemical and Refinery Plants
Kaohsiung’s process plants operate substation bays at 11 kV and above. Class 2 and Class 3 mats provide verified dielectric protection in these chemically aggressive electrical environments.Steel Mills and Heavy Manufacturing
Electric arc furnaces and rolling mill drive panels carry extreme current loads. Rated insulating mats at bus bar areas and MCC rooms are a mandatory safety layer for operators working near this equipment.Electronics and PCB Manufacturing
Production clusters in Taoyuan, Tainan, and New Taipei run large HT switchboards and generator rooms across multiple shifts. Voltage-rated mats at each panel front ensure consistent operator protection.Taiwan Power Company Substations
Taipower’s transmission and distribution substations require IEC 61111 mats at control panels and switchgear bays as a standard electrical safety requirement across all operating regions.Data Centres and Critical Power Infrastructure
High-density power distribution systems in Taipei and Taoyuan data centres involve multiple HV and LV switch rooms. Class 1 and Class 2 mats are the standard safety flooring at these installations.
Why Choose Duratuf for Electrical Safety Mats in Taiwan?
16+ Years of Industry Knowledge
We have been serving industries with our quality-assured insulating mats for the past 16+ years.
Legally Required Quality Assurance
Our insulating mats are compliant with the IEC 61111:2009 and ASTM D178 standards.
Customization Capability
We offer customization option for sizes and thicknesses as per your project requirements.
Expertise in Bulk Deliveries
With our efficient supply chain team and well-managed inventory we ensure fulfillment of large-volume orders.
Technical Assistance
From installation to maintenance, we ensure you get end-to-end reolution of queries and support throughout your purchase journey.
Our Clientele
Buy Insulating Rubber Mats in Taiwan
For IEC 61111 and IS 15652 insulating mats in Taiwan, connect with us for bulk supply, datasheets, and pricing.
