Duratuf Rubber Matting for Electrical Switch Room: An Overview
Duratuf electrical insulating rubber mats are electrically non-conductive and are used as Personal Protective Equipment. They are made of high-quality elastomer. Tested rigorously, the Duratuf rubber matting electrical switch room has a proven dielectric strength.
Considering the harsh weather in Jordan, we add special compounds while manufacturing our electrical insulator mats- that make them extra durable.
For Jordan’s workplaces, we offer BIS-approved IS 15652 electrical mats, IEC 61111:2009, and ASTM D178 electrical insulating rubber mats.
Duratuf electrical mats are mainly preferred in phosphate extraction, petroleum refining, cement production, construction, chemical factories, power generation, metal processing, and mining, in Jordan.
IS 15652 electrical mats
Our IS 15652 rubber mat for electrical panel room comes in Class A (3.3 kV), Class B (11 kV), and Class C (33 kV). The standard size of our 3.3 kV, 11 kV, and 33 kV insulation mat is 1 m x 10 m. The thickness of the mats is 2 mm, 2.5 mm, and 3 mm respectively.
IEC 61111:2009 electrical mats
The Duratuf IEC 61111: 2009 electrical rubber safety mat comes in 4 classes: IEC Class 0 (1 kV), IEC Class 1 (7.5 kV), IEC Class 2 (17 kV), IEC Class 3 (26.5 kV) and IEC Class 4 (36 kV). Whether you are getting a Duratuf electrical safety matting 1000 V (1 kV) or 36000 V (36 kV), you get quality-certified products. The weight of these mats ranges between 32 kg and 72 kg.
ASTM D178 electrical mats
Our ASTM D178 electrical mats also come in Class 0 to 4, offering the same voltage protection as the IEC 61111:2009 mats. Nevertheless, they are further classified into Type I and Type II grades.
Duratuf rubber matting electrical switch room is valued all over Jordan. We are proud to supply our electrical safety matting to the Zarqa Power Plant, Jordan, recently- among the other significant names.
Here are some key features of our electrical insulating rubber mats:
Anti-Skid:
All our electrical mats have a textured anti-skid and anti-slip surface.
Fatigue reduction:
The practical design on the upper surface of our rubber matting for electrical switch room, reduces discomfort in the lower leg of the workers.
Clear Product Labels:
The clear product labels on our electrical mats help them identify fast and store easily.
Quality-Certified:
The Duratuf electrical insulator mats are quality-certified and come with proper documents.
For more details, reach out to our team now!
Certifications & Memberships
Technical Specification
Technical Specifications: IEC 61111:2009 Insulating Mats
| Material Composition | Mechanical Puncture Resistance (min) | Slip Resistance (min) | Ageing Properties at 70±2°C for 168 hours | Flame Retardance | Low Temperature Test at – 25±3°C | Acid Resistance | Oil Resistance | Working Temperature | |
|---|---|---|---|---|---|---|---|---|---|
| Elastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers. | 70 N | 50 N | Mechanical Puncture Resistance not less than 80% of original value | Does not catch fire | No visible tear, cracks or breaks | Mechanical Test Values not less than 75% of original value | Mechanical Test Values not less than 75% of original value | -25°C to 55°C | Note: ± 10% on thickness, ± 2% on length & width |
Technical Specifications: ASTM D178 Insulating Mats
| Properties | Type-I | Type-II |
|---|---|---|
| Material Composition | Made of elastomer or combination of elastomeric compound | |
| Tensile Strength (min) | 4.83 MPa (700psi) | |
| Elongation at Break (min) | 250% | |
| Ageing Properties at 70±1°C for 168 hours. | Tensile strength not less than 50% of original value | |
| Moisture Absorption (% increase) | 1.5% (max) | 3% (max) |
| Ozone Resistance (Type IIA) | N.A. | No visible effect |
| Flame Resistance (Type IIB) | N.A. | 12.7 mm height max after 30 secs. |
| Oil Resistance | N.A. | 4% max volume increase. |
| * Unless specified otherwise, ASTM D178 mats is supplied as per Type I grade. Type II grade (A-Ozone Resistance, B-Flame Resistance, C-Oil Resistance) with a combination of all three or individual properties is also availble on request. | ||
| Note: ± 0.8 – 1.2 mm on thickness & ± 13-25 mm on width (subject to mat’s class and width) | ||
Technical Specifications: IS 15652- X-Volt Insulating Mats
| Material Composition | Tensile Strength (Min.) | Elongation at Break (Min.) | Leakage Current (Max.) | Insulation Resistance With Water When Tested At 5000 V (Min.) | Flame Retardance (Max.) | Aging Properties At 70 ± 1°C For 168 Hours | Acid, Alkali & Oil Resistance | Working Temperature |
|---|---|---|---|---|---|---|---|---|
| Elastomer free from any insertion | 15N/mm2 | 250% | 10 mA | 1,00,000 MΩ | Extinguishes Within 5 Secs | T.S & E.B Not Less Than 75% Of Original Value | T.S & E.B Not Less Than 80% Of Original Value | -10°C To 55°C |
Duratuf Electrical Insulating Rubber Mats: More Details
Applications of the Duratuf Electrical Rubber Mats
- Electrical Substations (Substation Control Rooms, Switchyards etc)
- Power Plants (Generator and Turbine Areas, Transformer Yards etc)
- High Voltage Rooms (Testing Labs, Switchgear Room, Control Rooms etc)
- Switchgear Rooms (Distribution Boards, Circuit Breaker Panels etc)
- Control Panels (Electrical Cabinets, Variable Frequency Drives (VFD) Cabinets etc)
- Data Centers (UPS Rooms, Telecommunication Rooms, Generator Rooms etc)
- Battery Rooms (Battery Storage Racks, Battery Charging Stations etc)
- Transformer Stations (Cable Trenches, Busbar Areas, Switching Areas etc)
- Electrical Laboratories (Circuit Testing Zones, Equipment Testing Zones etc)
- Railway Electrification Systems (Signal Equipment Rooms, Overhead Equipment (OHE) Maintenance Depots etc)
Exclusive Features Of Duratuf Electrical Insulation Mats
High Di-electric Strength
Quality-Certified
Safety-Audit Passed
Chemical, UV, Ozone and Flame Retardant
Moisture and Water Resistant
Up to 10,000 sq m Ready Stock
Free Expert Guidance
Competitive Pricing
End-to-End Customer Support
FAQs: X-Volt Electrical Insulating Mat
Customer Reviews
Excellent products with Exception Service from Mr.Tapabrata !!!
We have had some inquiries for Electrical Mats and they have given us good response to it. Their quality is at par with the European and American products and would definitely recommend it.
Good Customer support and Product.
We purchased Electrical Insulation Rubber mats for our Project in Doha. Had a good Experience with Mr. Tapabrata who supported till delivery. We can say with confidence that this mat is good and durable. Recommended!
Our Clientele
ELECTRICAL SAFETY BLOGS
Our Insulating Mats are available in Amman, Zarqa, Irbid, Russeifa, Sahab, Ar Ramtha, Aqaba, Mafraq, Madaba, Al-Jizah and all over the Jordan.
