Duratuf Electric Safety Mats: An Overview
Duratuf Products has a wide range of electrical rubber mats confirming with IEC 61111:2009, ASTM D178, and IS 15652 standards. The most popular Duratuf electrical rubber mats in the UK and other parts of Europe is IEC 61111:2009. Our IEC 61111 electrical safety mats offer high voltage protection from 1000 Volts to 36000 Volts. Made of high quality elastomer, these safety mats efficiently reduce all kinds of electricity-related accidents.
The Duratuf IEC 61111 high voltage rubber mats are safety-compliant. These are certified by the European standards of safety, as reliable personal protective equipment in industrial and commercial workplaces. Our experts make sure that our insulating mats strictly adheres to the regional standards of safety as well.
Many of our customers in the UK trust Duratuf IEC 61111 electrical safety rubber matting more than the BS EN 61111:2009.
Why go for Duratuf IEC 61111:2009 electrical safety matting?
Easy to install:
Being lightweight our IEC 61111 safety mats can be installed quickly and without any expert assistance.
Long-lasting:
If used and stored under the right conditions, Duratuf electrical rubber mats last a minimum 5-6 years.
Anti-skid:
Having a textured surface below, our IEC 61111:2009 electrical mats reduces falls, slips, and trips in high-traffic areas.
Ready-availability:
Need insulating mats in bulk within a short duration of time? We have up to 10,000 sq m of ready-stock of electrical safety matting.
Reach out to our specialists if you have queries about our products.
Certifications & Memberships
Technical Specification
Technical Specifications: IEC 61111:2009 Electrical Rubber Mats
| Material Composition | Mechanical Puncture Resistance (min) | Slip Resistance (min) | Ageing Properties at 70±2°C for 168 hours | Flame Retardance | Low Temperature Test at – 25±3°C | Acid Resistance | Oil Resistance | Working Temperature | |
|---|---|---|---|---|---|---|---|---|---|
| Elastomer free from any insertion. Typically, a combination of natural rubber and other synthetic polymers. | 70 N | 50 N | Mechanical Puncture Resistance not less than 80% of original value | Does not catch fire | No visible tear, cracks or breaks | Mechanical Test Values not less than 75% of original value | Mechanical Test Values not less than 75% of original value | -25°C to 55°C | Note: ± 10% on thickness, ± 2% on length & width |
Technical Specifications: ASTM D178 Switchboard Matting
| Properties | Type-I | Type-II |
|---|---|---|
| Material Composition | Made of elastomer or combination of elastomeric compound | |
| Tensile Strength (min) | 4.83 MPa (700psi) | |
| Elongation at Break (min) | 250% | |
| Ageing Properties at 70±1°C for 168 hours. | Tensile strength not less than 50% of original value | |
| Moisture Absorption (% increase) | 1.5% (max) | 3% (max) |
| Ozone Resistance (Type IIA) | N.A. | No visible effect |
| Flame Resistance (Type IIB) | N.A. | 12.7 mm height max after 30 secs. |
| Oil Resistance | N.A. | 4% max volume increase. |
| * Unless specified otherwise, ASTM D178 mats is supplied as per Type I grade. Type II grade (A-Ozone Resistance, B-Flame Resistance, C-Oil Resistance) with a combination of all three or individual properties is also availble on request. | ||
| Note: ± 0.8 – 1.2 mm on thickness & ± 13-25 mm on width (subject to mat’s class and width) | ||
Technical Specifications: IS 15652- X-Volt Insulating Mats
| Material Composition | Tensile Strength (Min.) | Elongation at Break (Min.) | Leakage Current (Max.) | Insulation Resistance With Water When Tested At 5000 V (Min.) | Flame Retardance (Max.) | Aging Properties At 70 ± 1°C For 168 Hours | Acid, Alkali & Oil Resistance | Working Temperature |
|---|---|---|---|---|---|---|---|---|
| Elastomer free from any insertion | 15N/mm2 | 250% | 10 mA | 1,00,000 MΩ | Extinguishes Within 5 Secs | T.S & E.B Not Less Than 75% Of Original Value | T.S & E.B Not Less Than 80% Of Original Value | -10°C To 55°C |
Duratuf Electrical Insulating Rubber Mats: More Details
Applications of the Duratuf Electrical Safety Mats
The Duratuf rubber safety mats are used in and near:
- Electrical Control Rooms
- Switchgear Rooms
- Motor Control Centers
- Transformer Yards
- Temporary Electrical Installations
- Electrical Utility Poles
- HT-LT Panels
- Areas With Exposed Electrical Conductors, etc
If you want to know the application areas of our safety mats in detail, contact us to talk to our specialists.
Exclusive Features Of Duratuf Electrical SAFETY MatTINGS IN uk
High Di-electric Strength
Quality-Certified
Safety-Audit Passed
Chemical, UV, Ozone and Flame Retardant
Moisture and Water Resistant
Up to 10,000 sq m Ready Stock
Free Expert Guidance
Competitive Pricing
End-to-End Customer Support
FAQs: Electrical Safety Mat
Customer Reviews
hesddarLJDFtotFBN
XMiKPBAZmsXIosaKCiNRecR
Excellent products with Exception Service from Mr.Tapabrata !!!
We have had some inquiries for Electrical Mats and they have given us good response to it. Their quality is at par with the European and American products and would definitely recommend it.
Our Clientele
Our Insulating Mats are available in London, Birmingham, Manchester, Liverpool, Leeds, Newcastle upon Tyne (Newcastle), Sheffield, Bristol, Nottingham, Leicester, Coventry, Bradford, Stoke-on-Trent, Wolverhampton, Derby, Southampton, Portsmouth, Plymouth, Luton, Reading, Northampton, Milton Keynes, Peterborough, Oxford, Cambridge, York, Exeter, Canterbury, Winchester, Bath, Gloucester, Carlisle, Durham, Worcester, Hereford, Salisbury, Chester, Ripon, Truro, St Albans and all over United Kingdom.
