Electrical Rubber Mat in Kochi, Kerala
Buy IS 15652:2006 type-tested, ISI-marked Duratuf XVolt electrical insulating mats for substations, panels, control rooms and other electrical installations across Kerala from Duratuf, a trusted supplier
Duratuf XVolt Electrical Rubber Mat
Electrical workers at Kochi’s BPCL refinery in Ambalamugal, the chemical and process plants along the Eloor-Edayar industrial belt, the generator rooms inside Infopark and SmartCity Kakkanad, the electrical bays at Cochin Shipyard and the manufacturing units across Kalamassery and Aluva all work near the same thing: live switchgear, panels and transformer equipment through every shift. The risk of accidental contact is real across all of these industrial sites, and the mat on the floor at that panel needs to be IS 15652-certified, not just rubber sheeting passed off as one.
Duratuf’s XVolt electrical rubber mat is built to close that gap and keep operators safe from shock while they work. It is manufactured and type-tested to IS 15652:2006, ISI marked under BIS approval and available in Class A, B and C offering safety up to 36 kV so it matches whatever voltage you are dealing with from a control panel to a full substation. We offer timely and secure delivery across Kerala from our Bhiwadi warehouse and custom sizes are also available if your site needs something different from our standard mats.
Key Features of Electrical Insulating Mats – IS 15652
Every XVolt insulating mat we dispatch to Kochi is type-tested to IS 15652:2006 before it leaves our Bhiwadi warehouse. Whether it is for a switchgear room in a process plant, a generator bay inside an IT/data center campus or an electrical installation in manufacturing units, here is what actually determines whether a mat passes inspection and holds up in service.
ISI Marked
Type tested to IS 15652:2006, ISI Marked approved by BIS
Class A, B & C Ratings
Working voltages of 3.3 kV, 11 kV and 33 kV to match your installation
High Dielectric Strength
Offers exceptional dielectric performance for maximum protection against electrical shock.
Anti-Skid Surface
Engineered with a dotted anti-slip top and textured anti-skid bottom for enhance safety & stability
Wide Temperature Range
Performs reliably from -10°C to +55°C
Standard Sizes and Asthetic Colors
All standard sizes are available as per IS 15652:2006 along with asthetic colors (Black, Blue & Red)
Compliance and Standards
In Kerala, electrical safety matting comes under the Chief Electrical Inspector to the Government of Kerala, a statutory authority under the state’s Electricity Department. KSEB manages power distribution across Kochi’s industrial and commercial zones, but the IS 15652:2006 compliance requirement for switchgear rooms, transformer bays and panel areas is enforced by the Electrical Inspectorate during periodic audits of HT-connected facilities. Duratuf’s XVolt electrical rubber mats are manufactured and type-tested to IS 15652:2006 and carry the ISI mark with BIS approval, which is what inspection officers look for during those facility checks.
IS 15652 Electrical Insulating Mats Classes and Voltage Rating
| Class | Thickness | Working Voltage | AC Proof Voltage | Dielectric Strength |
|---|---|---|---|---|
| A | 2.0 mm | 3.3 kV | 10.0 kV | 30.0 kV |
| B | 2.5 mm | 11.0 kV | 22.0 kV | 45.0 kV |
| C | 3.0 mm | 33.0 kV | 36.0 kV | 65.0 kV |
Also available with Auto-Glow Safety Border featuring a 2" auto-glow strip and 3" high-visibility yellow safety strip along both edges accross the length, clearly defining the safe working area during normal operation and maintaining boundary visibility during power outages or low-light conditions.
IS 15652 Electrical Mat Technical Specification
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. Typically, a combination of PVC and synthetic rubber polymers. |
| Antiskid Design | Dotted Design |
| Tensile Strength (T.S.) | 15 N/mm² (min.) |
| Elongation at Break (E.B.) | 250% (min.) |
| Leakage Current | 10 mA (max.) |
| Insulation Resistance with Water when tested at 500 V | 1,00,000 MΩ (min.) |
| Flame Retardant | Extinguishes within 5 secs (max.) |
| Ageing Properties at 70±1°C for 168 hours | T.S. & E.B. not less than 75% of original value |
| Acid, Alkali & Oil Resistance | T.S. & E.B. not less than 80% of original value |
| Working Temperature | -10°C to 55°C |
| Standard Size | 1.0 Mtr. Wide x 10.0 Mtr. Long for all classes |
| Custom Size | 1.0 Mtr. Wide x Length as per Customer's Requirement up to 30mtr. Long. |
| Standard Colour | Black, Blue & Red without Metallic Derivatives. |
Cut lengths, custom shapes, and colours are available upon request.
Note: Manufacturing tolerance of ±10% on thickness, ±15mm on width & length up to 600mm and ±20mm for higher.
Application of Electrical Rubber Mats in Kochi, Kerala
The insulating mats are used in electrical installations where operators work near live electric devices and the risk of electrical hazards is high. From the refinery and chemical units to the IT campuses and the shipbuilding and port facilities along the waterfront, Kochi’s industrial and commercial base runs a wide range of electrical equipments that need IS 15652-compliant matting. Here is where Duratuf XVolt electrical insulating mats can be deployed across the city’s sites.
- Electrical Substations
- HT/LT Control Panel Flooring
- Switchboard & Switchgear Rooms
- Transformer Rooms
- Generator & Lift Rooms
- Bus Bar Areas
- Live Equipment Work Areas
- MCC Rooms
- Relay & Metering Rooms
- Distribution Transformer Platforms
- Cable Junction & Joint Areas
- Electrical Maintenance & Testing Bays
Working in any of these areas?
Get the right mat class for your voltage requirement.
Why Choose Duratuf for Insulating Rubber Matting in Kochi
At Duratuf, we help industries operate more safely and effectively through complaints, technology-driven safety solutions. we Believe that earning a living should never cost a life.
Years of Industrial Safety Expetise
With 16+ years in the business and 4,142+ happy customers across 65+ countries, our insulating mats are already at work.
ISI Marked Manufacturing
Every XVolt mat is manufactured and type-tested to IS 15652:2006, so you get ISI marked matting built to India's electrical safety standard.
Global distribution network
We dispatch to Kochi from our Bhiwadi warehouse through a reliable logistics network, ensuring our electrical mats reach your industrial site on scheduled time.
Brand Reputation
Repeat orders from EHS managers and procurement teams across Kerala's industrial and commercial sectors, who need consistent product quality and test documentation every time.
What Our Clients Say
"The team has been very responsive and prompt by sharing the required information on the products as well as channel partners"
"Good experience with Duratuf and good insulating mat as well"
"As an authorized dealer for the Gujarat region, we have had an exceptional experience working with Team Duratuf. Their staff is incredibly polite, highly supportive, and always ready to assist with any queries. The ordering and delivery processes are consistently quick and entirely hassle-free."
"We are satisfied with the excellent product quality, reliable services, and consistent supply."
"Quality product and good service"
"I would like to appreciate the excellent support and professional coordination from your side. Your prompt response and helpful approach are truly commendable."
"Good service and polite staff, very satisfied with the service."
"We received the quotation for the rubber mat very promptly, which reflects excellent responsiveness and professionalism. The quick turnaround helped us proceed with our evaluation without delay."
"Your service is good and we have received your product and your follow up is also good."
Frequently Asked Questions
Is it KSEB or the Electrical Inspectorate that requires IS 15652 mats in Kerala facilities?
These are two separate authorities. KSEB distributes power and may flag safety concerns during a connection inspection, but the requirement for IS 15652-certified matting in switchgear rooms and panel areas is enforced by the Chief Electrical Inspector to the Government of Kerala during mandatory facility audits.
Can IS 15652 mats be used inside electrical rooms at Kochi's port and shipyard facilities where floors can get damp?
IS 15652 mats are designed for indoor electrical installations in front of live panels and switchgear, not for wet or outdoor surfaces. If the floor inside an electrical room has dampness or water ingress, the floor should be dried before placing the mat. The mat's insulation resistance is tested with surface moisture to IS 15652 standards, but placing it over standing water does not make the working area electrically safe.
How should IS 15652 electrical rubber mats be cleaned and maintained at our facility?
Wipe the surface with a dry or lightly damp cloth. Avoid petroleum-based solvents and strong cleaning agents as these degrade the rubber over time. Store mats rolled, away from sharp edges, heavy loads and direct sunlight. Inspect regularly for cracks, punctures or surface hardening. Any of these signs mean the mat needs replacing regardless of how old it is or whether the warranty period has elapsed.
