Electrical Rubber Mat in Visakhapatnam, Andhra Pradesh
Buy IS 15652:2006 type-tested, ISI-marked Duratuf XVolt electrical insulating mats for substations, panels, control rooms and other electrical installations across Andhra Pradesh from Duratuf, a trusted supplier
Duratuf XVolt Electrical Rubber Mat
Plant operators and electrical technicians across Visakhapatnam’s RINL steel complex in Gajuwaka, the HPCL refinery, Visakhapatnam Port Trust, Hindustan Shipyard and the pharmaceutical units at JN Pharma City in Parwada all work near high-voltage switchgear, panels and transformer equipment as part of every shift. In a city where steel, petroleum refining, port operations, shipbuilding and pharma manufacturing run alongside each other, the electrical safety requirement at each of those sites is the same: an IS 15652-certified electrical mat that is tested to the standard, not just labelled.
Duratuf’s XVolt electrical rubber mat is engineered to keep operators safe from shock while they work. Our electrical mats is manufactured and type-tested to IS 15652:2006, ISI marked under BIS approval and available in Class A, B and C offering safety up to 36 kV so it matches whatever voltage you are dealing with from a control panel to a full substation. We offer timely and secure delivery across Andhra Pradesh from our Bhiwadi warehouse and custom sizes are also available if your site needs something different from our standard mats.
Key Features of Electrical Insulating Mats – IS 15652
Every XVolt mat we dispatch to Visakhapatnam is type-tested to IS 15652:2006 before it leaves our Bhiwadi warehouse. Whether it is for a switchgear room in steel complex, a transformer bay in refinery or an electrical installation in pharma units, here is what actually determines whether a mat passes inspection and holds up in service.
ISI Marked
Type tested to IS 15652:2006, ISI Marked approved by BIS
Class A, B & C Ratings
Working voltages of 3.3 kV, 11 kV and 33 kV to match your installation
High Dielectric Strength
Offers exceptional dielectric performance for maximum protection against electrical shock.
Anti-Skid Surface
Engineered with a dotted anti-slip top and textured anti-skid bottom for enhance safety & stability
Wide Temperature Range
Performs reliably from -10°C to +55°C
Standard Sizes and Asthetic Colors
All standard sizes are available as per IS 15652:2006 along with asthetic colors (Black, Blue & Red)
Compliance and Standards
In Andhra Pradesh, electrical safety matting falls under the Chief Electrical Inspector to the Government of Andhra Pradesh, a statutory authority under the state’s Energy Department. APEPDCL manages power distribution across Visakhapatnam’s industrial and commercial zones, but the IS 15652:2006 compliance requirement for switchgear rooms, transformer bays and panel areas is enforced by the Electrical Inspectorate during mandatory audits of HT-connected facilities. Duratuf’s XVolt electrical mats are manufactured and type-tested to IS 15652:2006 and carry the ISI mark with BIS approval, which is what inspection officers look for during those facility checks.
IS 15652 Electrical Insulating Mats Classes and Voltage Rating
| Class | Thickness | Working Voltage | AC Proof Voltage | Dielectric Strength |
|---|---|---|---|---|
| A | 2.0 mm | 3.3 kV | 10.0 kV | 30.0 kV |
| B | 2.5 mm | 11.0 kV | 22.0 kV | 45.0 kV |
| C | 3.0 mm | 33.0 kV | 36.0 kV | 65.0 kV |
Also available with Auto-Glow Safety Border featuring a 2" auto-glow strip and 3" high-visibility yellow safety strip along both edges accross the length, clearly defining the safe working area during normal operation and maintaining boundary visibility during power outages or low-light conditions.
IS 15652 Electrical Mat Technical Specification
| Characteristics | Values |
|---|---|
| Material Composition | Elastomer free from any insertion. Typically, a combination of PVC and synthetic rubber polymers. |
| Antiskid Design | Dotted Design |
| Tensile Strength (T.S.) | 15 N/mm² (min.) |
| Elongation at Break (E.B.) | 250% (min.) |
| Leakage Current | 10 mA (max.) |
| Insulation Resistance with Water when tested at 500 V | 1,00,000 MΩ (min.) |
| Flame Retardant | Extinguishes within 5 secs (max.) |
| Ageing Properties at 70±1°C for 168 hours | T.S. & E.B. not less than 75% of original value |
| Acid, Alkali & Oil Resistance | T.S. & E.B. not less than 80% of original value |
| Working Temperature | -10°C to 55°C |
| Standard Size | 1.0 Mtr. Wide x 10.0 Mtr. Long for all classes |
| Custom Size | 1.0 Mtr. Wide x Length as per Customer's Requirement up to 30mtr. Long. |
| Standard Colour | Black, Blue & Red without Metallic Derivatives. |
Cut lengths, custom shapes, and colours are available upon request.
Note: Manufacturing tolerance of ±10% on thickness, ±15mm on width & length up to 600mm and ±20mm for higher.
Application of Electrical Rubber Mats in Visakhapatnam, Andhra Pradesh
The insulating mats are used in electrical installations where operators work near live electric devices and the risk of electrical hazards is high. Visakhapatnam’s industrial spread across Gajuwaka, Parwada, Duvvada, the harbour area and the port corridor means a large number of heavy-duty electrical equipments that depend on IS 15652-compliant matting to protect their workforce. Here is where Duratuf XVolt insulating mats can be used across the industrial sites.
- Electrical Substations
- HT/LT Control Panel Flooring
- Switchboard & Switchgear Rooms
- Transformer Rooms
- Generator & Lift Rooms
- Bus Bar Areas
- Live Equipment Work Areas
- MCC Rooms
- Relay & Metering Rooms
- Distribution Transformer Platforms
- Cable Junction & Joint Areas
- Electrical Maintenance & Testing Bays
Working in any of these areas?
Get the right mat class for your voltage requirement.
Why Choose Duratuf for Insulating Rubber Matting in Visakhapatnam
At Duratuf, we help industries operate more safely and effectively through complaints, technology-driven safety solutions. we Believe that earning a living should never cost a life.
Years of Industrial Safety Expetise
With 16+ years in the business and 4,142+ happy customers across 65+ countries, our insulating mats are already at work.
ISI Marked Manufacturing
Every XVolt mat is manufactured and type-tested to IS 15652:2006, so you get ISI marked matting built to India's electrical safety standard.
Global distribution network
We dispatch to Visakhapatnam from our Bhiwadi warehouse through a reliable logistics network, ensuring our products reach your site on agreed time.
Brand Reputation
Highly satisfied & loyal clientele base with years of repeat orders
What Our Clients Say
"The team has been very responsive and prompt by sharing the required information on the products as well as channel partners"
"Good experience with Duratuf and good insulating mat as well"
"As an authorized dealer for the Gujarat region, we have had an exceptional experience working with Team Duratuf. Their staff is incredibly polite, highly supportive, and always ready to assist with any queries. The ordering and delivery processes are consistently quick and entirely hassle-free."
"We are satisfied with the excellent product quality, reliable services, and consistent supply."
"Quality product and good service"
"I would like to appreciate the excellent support and professional coordination from your side. Your prompt response and helpful approach are truly commendable."
"Good service and polite staff, very satisfied with the service."
"We received the quotation for the rubber mat very promptly, which reflects excellent responsiveness and professionalism. The quick turnaround helped us proceed with our evaluation without delay."
"Your service is good and we have received your product and your follow up is also good."
Frequently Asked Questions
IS 15652 mats are rated to +55°C. Do they hold up in the high-temperature areas of steel and refinery plants?
The +55°C working temperature in IS 15652 refers to the ambient air temperature around the mat, not radiant heat from nearby equipment. In switchgear rooms and panel areas inside steel and refinery facilities, ambient temperatures are typically controlled and stay well within that range even if process areas nearby run much hotter. The mat should never be placed directly adjacent to a heat source or furnace opening.
Is it APEPDCL or the Electrical Inspectorate that enforces IS 15652 compliance in Visakhapatnam?
APEPDCL is the distribution licensee and handles power supply connections. The compliance authority for what goes inside an electrical installation is the Chief Electrical Inspector to the Government of Andhra Pradesh, whose Inspectorate conducts periodic audits of HT-connected industrial facilities. IS 15652-certified matting in switchgear rooms and panel areas is checked during those audits, not during an APEPDCL connection inspection.
Can IS 15652 mats be placed on the metal grating floors common in Visakhapatnam's steel and refinery facilities?
IS 15652 mats are designed to be placed on solid, flat flooring in front of electrical panels and switchgear. Placing them on open metal grating is not recommended because the mat can flex into the gaps under an operator's weight, reducing the effective insulation contact area and creating an uneven standing surface.
